Audio Technica System 10 Portable Camera Mount Belt Pack

Audio Technica System 10 Portable Camera Mount Belt Pack

With its compact and portable design, the System 10 Camera-Mount high-fidelity digital wireless system is ideally positioned to capture media on the go. Perfect for video production, electronic news gathering (ENG) and every mobile application in between, the receiver features multiple mounting options to accommodate a variety of cameras and recording devices.
Like all of the products in the System 10 digital wireless family, the Camera Mount provides three levels of diversity assurance: frequency, time and space. Instantaneous channel selection, sync and setup make the Camera-Mount extremely easy to use, while its digital 24-bit/48 kHz wireless operation provides the ultimate in sound quality and dependable performance. Also, as the receiver operates in the 2.4 GHz range, it remains completely free from TV interference at all times.

Features:

• Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
• Operates in the 2.4 GHz range – completely free from TV interference
• Ultra compact receiver size with multiple mounting options
• Selectable balanced and unbalanced output jacks with level control for use with most cameras and recording devices
• Internal rechargeable 12-hr battery
• Separate headphone port and volume control for local audio monitoring
• Multi-pairing function to link a single receiver with up to eight body-pack or handheld transmitters
• Three levels of diversity assurance: frequency, time & space
• Automatic frequency selection for seamless, interference-free operation
• Extremely easy operation with instantaneous channel selection, sync and setup

Overall System:

• Operating Frequencies 2.4 GHz ISM band (2400 to 2483.5 MHz)
• Frequency Response 20 Hz to 20 kHz
• Depending on microphone type
• Operating Range 30 m (100′) radius, 60 m (200′) diameter typical
• Open range environment with no interfering signals
• Total Harmonic Distortion <0.05% typical
• Operating Temperature Range 0° C to +40° C (32° F to 104° F)
• Battery performance may be reduced at very low temperatures
• Audio Sampling 24 bits / 48 kHz

Handheld Transmitter:

• RF Power Output 10 mW
• Spurious Emissions Following federal and national regulations
• Battery Type Two 1.5V AA
• not included
• Battery Life >7 hours (alkaline)
• Depending on battery type and use pattern
• Dimensions 254.8 mm (10.03″) long,
• 50.0 mm (1.97″) diameter
• Net Weight 280 grams (9.9 oz)
• without batteries
• Accessories Included AT8456a Quiet-Flex™ stand clamp

Body Pack:

• RF Power Output 10 mW
• Battery Life >7 hours (alkaline)
• Depending on battery type and use pattern
• Battery Type Two 1.5V AA
• not included
• Dimensions 70.2 mm (2.76″) W x 107.0 mm (4.21″) H x 24.9 mm (0.98″) D
• Input Connections Four-pin Locking Connector
• Pin 1: GND, Pin 2: INST INPUT,
• Pin 3: MIC INPUT, Pin 4: DC BIAS +9V
• Net Weight 100 grams (3.5 oz)
• without batteries
• Spurious Emissions Following federal and national regulations

Receiver:

• Receiving System Diversity (frequency/time/space)
• Maximum Output Level 3.5 mm (1/8″), TRS balanced: +6 dBV Dual mono, unbalanced: 0 dBV
• Power Supply 100-240V AC (50/60 Hz) to 5V DC 0.5A switched mode external USB-type external power supply
• Operating Temperature Range 40° F (4° C) to 110° F (43° C)
• Dimensions 56.0 mm (2.20″) W x 91.4 mm (3.60″) H x 27.8 mm (1.09″) D
• Weight 105 grams (3.7 oz)
• Accessories Included Two antennas; camera shoe mount; AC adapter (USB-type); USB cable; 3.5 mm (1/8″) stereo cable
• Battery Current/Life 12 hours
  Depending on environmental conditions
• Battery Charging Time: 4 hours 30 minutes
  Depending on environmental conditions
• Charging Temperature Range: 5° C to +35° C (41° F to 95° F)
• Battery Type Internal Battery: 3.7V rechargeable Li-ion battery
• Battery Rating: 5.5 Wh
  1,460 mAh